Stock Code: SH600522
|
Description |
4-port Sector Antenna, 2×1695-2690MHz,65Deg,20.5dBi,Integrated RET |
|||||
|
ZTT Product Code |
HBZ4D6521 | |||||
| Frequency Range | MHz |
2×1695-2690(Y1/Y2) |
||||
|
Frequency Band |
MHz | 1695-1990 | 1920-2200 | 2300-2500 |
2490-2690 |
|
|
Gain Over All Tilts |
dBi | 19.6±0.5 | 20.0±0.6 | 20.2±0.5 | 20.4±0.7 | |
| Gain by Tilt Average Mid | dBi | 19.5 | 20.0 | 20.3 |
20.4 |
|
|
Efficiency Average |
% | 80 | 78 | 79 | 78 | |
| Horizontal 3dB Beam Width | Deg | 70±4 | 66±7 | 63±6 |
61±6 |
|
|
Vertical 3dB Beam Width |
Deg | 4.9±0.5 | 4.8±0.4 | 4.0±0.8 | 3.5±0.5 | |
| 1st Upper Side Lobe
Suppression Above Main Beam |
dB |
≥15 |
||||
|
Front to Back Ratio at 180Deg ±30Deg |
dB |
≥25 |
||||
|
Cross Polar Ratio 0Deg |
dB |
≥15 |
||||
|
Electrical Downtilt |
Deg | 2-8,Continuously adjustable | ||||
| VSWR | / |
≤1.5 |
||||
|
Intraband Isolation |
dB | ≥26 | ||||
| Intermodulation IM3 | dBc |
≤-153(2×43 dBc carrier) |
||||
|
Max. Power Per Port |
Watt | 250(at 50℃ ambient temperature) | ||||
|
Mechanical Specifications |
||||||
|
Antenna Dimensions |
mm | 2000×295×145 | ||||
| Antenna Net Weight | kg |
17.1 |
||||
|
Packing Dimensions |
mm | 2225×361×217 | ||||
| Antenna Gross Weight | kg |
25.2 |
||||
|
Connector Type |
/ | 4×4.3-10 Female | ||||
| Connector Position | / |
Bottom |
||||
|
Radiator Material |
/ | Aluminum | ||||
| Radome Material / Color | / |
Fiberglass / Light Grey RAL7035 |
||||
|
Reflector Material |
/ | Aluminum | ||||
| Storage Temperature | °C |
-40 to +65 |
||||
|
Operating Temperature |
°C | -40 to +65 | ||||
| Humidity | / |
5% to 95% |
||||
|
Max. operational Wind Speed |
km/h | 200 | ||||
| Wind Load @Rated Wind Front | N |
1320 |
||||
|
Wind Load @Rated Wind Side |
N | 269 | ||||
| Wind Load @Rated Wind Rear | N |
1480 |
||||
|
Lightning Protection |
/ | DC ground | ||||
|
Accessories |
||||||
|
Model |
/ | HZJ36N | ||||
| Weight | Kg |
4.5 |
||||
|
Downtilt Kit (mechanical) |
Deg | 0-12 | ||||
| Mounting Accessories (clamp) | / |
Included with antenna |
||||
|
Mounting Pipe Diameter |
mm | 50-115 | ||||
|
Internal RET Specifications |
||||||
|
RCU (remote control unit) |
/ | Replaceable RET
(can be exchangable without exchanging antenna) |
||||
|
AISG2.0 /3GPP |
||||||
|
Input Voltage Range |
V | 10-30 DC | ||||
| Power Consumption | W |
< 10 (motor activated , single RET) < 2 (stand by, single RET) |
||||
|
Adjustment Time (full range) |
s | < 120 (typically, depending on antenna type) | ||||
| RET Connector | / |
1 pair of AISG 5 pin male & female |
||||
|
Pin Assignment According AISG |
/ | 5-pin circular connector conforming to IEC 60130-9 – Ed. 3.0 | ||||
| Lightning Protection | kA |
5 (8/20 μs differential mode), 8 (8/20 μs common mode) |
||||
|
Reference Pattern |
||||||
| FDD:1695-2690MHz | ||||||
| Horizontal Pattern |
Vertical Pattern |
|||||
 |
 |
|||||
|
Layout of Array |
||||
| Array | Connector | Frequency(MHz) |
RET Serial |
 |
|
Y1 |
1-2 | 1695-2690 | ZTY1…01 | |
| Y2 | 3-4 | 1695-2690 |
ZTY2…02 |
|
| All data are based on NGMN recommendations on Base Station Antenna Standards (BASTA V13.0). | ||||
Please provide the following details to help our sales representatives better understand your needs and get In touch with you as soon as possible.
Connecting the World
Powering the Future
Products
Quick Link
